Skip to content

Network Configuration

Your terminal must connect to the internet in order to process transactions and receive updates. Your terminal will be shipped with SIM installed and cellular enabled. You do not need to do anything to connect to the cellular 4G network.

When setting up your terminal for the first time, it's recommended that you connect to a trusted Wi-Fi network (rather than relying on the 4G network). Using a Wi-Fi connection will allow the terminal to update its software and configuration quickly if required and ensure you have network redundancy, should the cellular network become unavailable.

Wi-Fi

Connecting to a Wi-Fi Network

Communications
Wi-fi Menu
Wi-Fi Password
Wi-Fi Connected
Step Instructions
1 Select the Menu button (☰) from the top edge of the display.
2 Enter your Merchant Passcode.
3 Tap Settings > Communications > Wi-Fi
4 Tap the Wi-Fi toggle button turn on Wi-Fi.
5 Find the correct trusted Wi-Fi network you want to join and select it.
6 Enter the network password using the on-screen keyboard.
7 Once the Wi-Fi password has been entered correctly, the Wi-Fi symbol will be visible in the status bar on the top of the screen.
8 The icon will indicate whether the terminal has a strong or weak connection to the WiFi network. If the connection is weak, either move the terminal closer to to the Wi-Fi router, or you may need to install a Wi-Fi extender to boost your Wi-Fi signal and range.

Terminal will Automatically Reconnect to Wi-Fi

Each time the terminal leaves and re-enters this Wi-Fi network, the terminal will automatically re-connect to it.

Cellular Mobile Network

Turn Cellular On / Off

You may wish to enable or disable your cellular network. To do this, follow the instructions below.

Step Instructions
1 Select the Menu button (☰) from the top edge of the display.
2 Tap Settings > Communications
3 Enter your Merchant Passcode.
4 Tap the Mobile toggle button turn on/off the cellular connection.

Check Data Usage

Step Instructions
1 Select the Menu button (☰) from the top edge of the display.
2 Tap Settings > Communications > Mobile
3 Enter your Merchant Passcode.
4 A report showing the data usage of both the Wi-Fi and Cellular networks will be displayed.
5 You can see further details of usage over time by tapping the DATA USAGE buttons in both sections.

USB Network

If your terminal is connected to a POS PC, you can enable USB Network. This feature allows your terminal to use the PC's network connection via the USB cable, sharing your store's network with the terminal.

USB Network is typically configured in the middleware environment

If your POS uses EftposPlus Enterprise or Cloud EFTPOS, the USB Network setting is typically managed by the middleware software. You might notice that this setting is occasionally changed unexpectedly, likely due to actions by EftposPlus Enterprise or Cloud EFTPOS. Refer to your documentation or contact your POS helpdesk for instructions on configuring your terminal in an integrated environment.

USB Network Off
USB Network NCM

USB Network Options

To access the USB Network options, navigate to the Communications menu and select USB Network.

Option Explanation
Off While this option is selected, USB network will not be activated and the POS PC will not share its connection with the terminal.
NCM If your POS is running Windows 10/11 or Linux, activating this setting will enable the PC's network to be shared with the terminal.
RNDIS If your POS is running Windows 7 or 8, activating this setting will enable the PC's network to be shared with the terminal.

Performing a Network Connection Test

Your terminal is equipped with the capability to complete a network test to various hosts and endpoints. This test can be used to determine the connection to general and Quest server endpoints to determine any connection or firewall issues.

To perform the test, follow the steps below:

Step Instruction
1 Tap on the Dashboard button (☰). If the terminal is in integrated mode, the merchant passcode will need to be entered.
2 Scroll down to the settings button and tap on it.
3 Scroll down to the Diagnostics menu and tap on it.
4 Tap on the Connectivity Test button to enter the test interface.
5 Select the network type to test with from the dropdown and then tap on Run Test.

The test displays the following results upon completion for each endpoint:

  • Result (pass or fail)
  • Server or IP Address
  • Port Numbers
  • Round-trip Time
  • If this is a fail, the reason for the failure is presented
Connectivity Test